Sign Up
  Anchor, Dock & Mooring
Bilge
Book
Bow Thruster
Cabin
Clothing
Deck Hardware
Electrical
Electronics
Engine System
› Air Vent
› Anode
› Coupling
› Engine Bracket
› Engine Mounting
› Engine Oil
› Engine Paint
› Engine Starting Rope
› Exhaust System
› Extension For Outboard Engines
› Hose
› Indicators
› Oil
› Oil Drain Pump
› Outboard Carrier
› Propeller
› Shaft Bearings
› Shaft System
› Sound Proofing Material
› Spark Plug
› Trim Tab
› Water scoop
› Water Strainer

Fishing
Freshwater System
Fuel System
Generator
Gift
Gyro Stabilizer
Hobby
Inflatable Boat
Navigation
Paint/Maintenance
Safety
Sailboat Hardware
Steering/Control
Trailer
Ventilation
Waste Water Equipment
Water Maker
Watersport
Minn Kota Engine
Minn Kota Accessories
Vetus Engine

Top Links
 

Marine rug.


Plastic Polish/Restorer, 237 ml. 


Hooks to fasten canopies on to ribs’ profiles.


Electric Heater. 12V DC.


Push-pull system spring lock. 

Click here for all to see
 

Engine System  >  Trim Tab
StingRay™ Motor Kanadı

Stinger

Tasarımlarının doğası gereği, pervane ebatları teknenin ihtiyacına göre küçük, orta veya büyük boyutlarda olabilir. Küçük pitch’li pervaneler, düşük süratlerde tork ve hızlanma için iyi sonuçlar vermekte ancak yüksek süratlerde teknenin hızlanması biraz yavaş kalmaktadır. Büyük boyuttaki pervaneler ise yüksek süratlerde daha iyi hızlanmakta ancak kalkışta ve tekneyi kaydırmaya başlarken ağır kalmaktadır. Teknelerin çoğu ortalama pitch’de pervane ile donatılmıştır, kaymaya çabuk geçiş, hızlanma ve hızla son sürate erişme konusunda mükemmel değildirler. 

StingRay'in Stinger'ı estetik, performans ve HP uygulama yelpazesinde artışla, Classic Junior modeli üzerine yükseltme olarak tasarlanmıştır. 4 HP’den 300 HP’e kadar dıştan takma motorlar ve stern drive’lar için tasarlanmıştır. StingRay Stinger, daha küçük tekneler ve motor kurulumları için önemli bir kaldırma sağlarken, daha büyük tekne ve motor kurulumları ile gelişmiş kalkış ve maksimum en yüksek hız sağlar. En son hidrofoil teknolojisi ve stiline sahiptir. 40 HP altına 2 delikle monte edilirken, 40 HP üzerine montajda delik açma gerektirmez.

StingRay™ 'in kanatları su basıncını stabilize ederek, teknede stabil ve güvenli bir sürüş sağlar. Tekneler V şeklindeki tasarımları itibariyle yalpalanma yapar. Bu tehlikeli yandan yana sallanış kontrolü ve performansı düşürür. StingRay™ yalpalanmayı önler. StingRay™ motor kanadı ile teknenin kaymaya başlama süresi yarıdan fazla azalır. StingRay™ Kolay montaj imkanı sunar.
StingRay™ hydrofoil Stinger
Code : 4725132
Stock Status : Out of stock
Price (USD) : $ 146.67 + VAT
VAT included Price : 5,679.88 TL / ea

PRODUCT DETAILS
StingRay™ hydrofoil

Stinger
 
By the very nature of their design, propeller sizes simplistically come in small, medium, or large diameters and pitches. Small pitched props are better for increased low end torque resulting in good hole-shots and acceleration, but are typically slow in top-end speed. Larger pitched props are much faster on top-end speed but are slow in acceleration and may not ever get the boat up on plane. Most boats are equipped with a prop pitched somewhere in between, not great for plane and acceleration and not the fastest to-end speed.

StingRay's Stinger was designed as the upgrade for the Classic JR model in aesthetics, performance, and HP application range. Designed for outboards and most stern drives from 4 HP up to 300 HP. The StingRay Stinger provides significant lift to smaller boats and engine setups while providing larger boat and engine setups with improved holeshots and maximum top-end speed. Featuring the latest in hydrofoil technology and styling. Mounting with 2 drills under 40 HP, no drills required for mounting above 40 HP.

StingRayTM's wings then stabilize the water pressure, keeping the boat stable and safe. By their very desing, “V” bottom boats are susceptible to chinewalking. This dangerous side-to-side rocking lessens control and performance. StingRayTM eliminates Chinewalking. With a StingRayTM Hydrofoil stabilizer, you’re up on plane in less than half the time. Both the StingRayTM are easy to install. 

Model: Classic Senior
Colour: White


No comment.

1. Credit Cart
In advance with Visa / MasterCard : 5,679.88 TL

2. Transfer / EFT
0% Discounted money order : 5,679.88 TL

3. Payment options according to the banks
The number of installmentsInstallments (TL)In advance amount (TL)Installments (TL)In advance amount (TL)Installments (TL)In advance amount (TL)
23,011.766,023.513,011.766,023.512,971.155,942.29
31,893.295,679.881,893.295,679.881,893.295,679.88
41,532.866,131.431,532.866,131.431,509.156,036.58
51,237.656,188.231,237.656,188.231,216.636,083.15
6946.655,679.88946.655,679.88946.655,679.88
7904.726,333.07904.726,333.07882.176,175.17
8802.286,418.26802.286,418.26777.516,220.04
9631.105,679.88631.105,679.88631.105,679.88

  Customers who bought this item also bought
Flagpole, stainless steel. Lenght 40 cm. Suitable to mount between 22-25 mm rails. Flagpole, stainless steel. Lenght 40 cm. Suitable to mount between 22-25 mm rails. € 12.08 + VAT
Fuse holder. It comes with 15A, 6x32 mm glass fuse. Fuse holder. It comes with 15A, 6x32 mm glass fuse. $ 3.42 + VAT
Floating key rings. Floating key rings. € 3.17 + VAT
Fuse holder for ATO fuses. Watertight Fuse holder for ATO fuses. Watertight $ 2.25 + VAT
Fuse holder for glass fuses. It comes with 20 cm cable. Fuse holder for glass fuses. It comes with 20 cm cable. $ 0.58 + VAT
Hinge, stainless steel 64x37x20mm. Hinge, stainless steel 64x37x20mm. $ 4.00 + VAT
Webbing snap hook, stainless steel, 25 mm. Webbing snap hook, stainless steel, 25 mm. $ 1.58 + VAT
Mooring line with eye Mooring line with eye € 12.09 + VAT
Plastic hook. Plastic hook. € 0.83 + VAT


Marintek Catalogue 2024

Marintek Catalogue 2024

Protackle Catalogue 2018

Protackle Catalogue 2018

Sorensen's Guide of Powerboats
Sorensen's Guide of Powerboats


marintekstore.com ©1989-2024

Home Page  |   About Us  |   Orders  |   Customer Services  |   Contact  |   Conditions of Use  |   Site Maps  |   Marintek Group