• Shaft diameter: up to 40 mm

• Up to 65 HP & 40hp at 1200 shaft rpm

• Used as a drive shaft alone the CV15 series shaft will take up to 100hp at 2500rpm.

• The maximum speed of the drive shaft: 8000 rpm

• The maximum speed of thrust bearing: 4000 rpm

• 60 HP = 45 kW (1HP~0.75kW)

• CV10 can be manufactured to required length up on request, apart from the standart length of 154 mm

• Standard coupling mounting: Yanmar, Volvo, 4”-5” coupling

• Non-standard coupling adapter kits are custom order
 

Above example is based on optimum conditions with 2 degrees of CV joint angle. The maximum permitted power must be reduced normally by 10% for each degree over 2.